Playing Back With A Dvd Writer - JVC GZ-GX1BUS Detailed User Manual

SELECT FROM SCENES
REQUIRED DISC SPACE
DVD:2 / DVD(DL):1
PREPARE AN EMPTY DISC
EXECUTE
.
The number of discs required to copy the files is displayed.
0
Prepare the discs accordingly.
7
Tap "AUTO" or "BY DATE". (A mode only)
SELECT FROM SCENES
CREATE HEADLINES
ON THE TOP MENU
SELECT THE SORT METHOD
AUTO
.
When "AUTO" is selected, videos with similar recording dates are
0
displayed in groups.
When "BY DATE" is selected, videos are displayed according to
0
recording dates.
8
Tap "EXECUTE".
SELECT FROM SCENES
EXECUTE
.
When "INSERT THE NEXT DISC TO CREATE OR PRESS STOP TO
0
EXIT" appears, change the disc.
9
Tap "OK" when "COMPLETED" is displayed.
SELECT FROM SCENES
COMPLETED
.
10
Press and hold the M button for 2 seconds or more to turn off this unit
and disconnect the USB cable.
Caution :
Do not turn off the power or remove the USB cable until copying is
0
complete.
Files that are not on the index screen during playback cannot be copied.
0
Special files cannot be copied either.
All DVDs will be finalized automatically.
0
Files cannot be added to the DVD-R/DVD-RW later.
Memo :
To check the created disc, refer to ""Playing Back with a DVD Writer"
0
(A p. 145) ".
"Playing Back with a DVD Writer" (A p. 145)
RETURN
BY DATE
REMAINING
DVD 02
DVD(DL)1
STOP
OK

Playing Back with a DVD Writer

You can play back the DVDs created on this unit.
1
Prepare a DVD writer.
Insert the DVD to play back into the DVD writer.
0
"Preparing a DVD Writer (CU-VD3)" (A p. 140)
"Preparing a DVD Writer (CU-VD50)" (A p. 140)
2
Tap "PLAYBACK" in the BACK-UP menu.
VIDEO BACKUP
CREATE FROM ALL
SELECT AND CREATE
PLAYBACK
.
An index screen (thumbnail display) of the videos in the disc appears.
0
Tap A to switch between the video (60i) and still image modes.
0
3
Tap on the file to start playback.
.
Tap "J" to return to the "BACK-UP" menu.
0
For details on video playback, refer to ""Operation Buttons for Video
0
Playback" (A p. 119) ".
"Operation Buttons for Video Playback" (A p. 119)
To exit, stop playback and turn off the camcorder by pressing the M
0
button for about 2 seconds. Then, disconnect the USB cable.
Memo :
To play back the recorded image on TV, connect this unit via the HDMI
0
mini cable or the AV Cord while this unit is connected to the DVD writer.
"Connecting via the HDMI Mini Connector" (A p. 126)
"Connecting via the AV Connector" (A p. 127)
Copying
145