Setting The Enforced Group Owner (Direct Monitoring); Checking The Mac Address Of This Camera - JVC GZ-GX1BUS Detailed User Manual

Using Wi-Fi

Setting the Enforced Group Owner (DIRECT MONITORING)

Sets whether to enforce authorization of the group owner.
1
Tap "MENU".
(Operation on this camera)
PLAY
.
The shortcut menu appears.
0
2
Tap "Wi-Fi" (Q) in the shortcut menu.
(Operation on this camera)
.
3
Tap "NETWORK SETTINGS".
(Operation on this camera)
Wi-Fi
NETWORK SETTINGS
.
4
Tap "Wi-Fi DIRECT SETTING".
(Operation on this camera)
NETWORK SETTINGS
Wi-Fi DIRECT SETTING
.
5
Tap "ENFORCED GROUP OWNER".
(Operation on this camera)
Wi-Fi DIRECT SETTING
ENFORCED GROUP OWNER
.
Tap "ON" or "OFF".
0
It is recommended to select "ON" usually.
0
If connection to devices that support Wi-Fi Direct fails, set to "OFF".
After setting, tap "SET".
0
Memo :
When set to "OFF", connection to devices that do not support Wi-Fi Direct
0
will be disabled.
42
REC MENU
MENU
SET

Checking the MAC Address of this Camera

Displays the MAC address of the camera.
1
Tap "MENU".
(Operation on this camera)
PLAY
.
The shortcut menu appears.
0
2
Tap "Wi-Fi" (Q) in the shortcut menu.
(Operation on this camera)
.
3
Tap "NETWORK SETTINGS".
(Operation on this camera)
Wi-Fi
NETWORK SETTINGS
.
4
Tap "MAC ADDRESS".
(Operation on this camera)
NETWORK SETTINGS
MAC ADDRESS
.
The MAC address of the camera appears.
0
(The above shows the MAC address when connected to an access
point, while the below shows the address during direct connection.)
After setting, tap "SET".
0
REC MENU
MENU