EdgeStar TWR121ES Owner's Manual page 6

Racks
Please note that the racks for your cooler have a top and a bottom. If you are
having trouble fitting the stated number of bottles in the cooler (provided you
have standard wine bottles), try flipping over one or more racks.
Also note that your wine cooler (depending upon the model) may have more
"slots" for racks than the number of racks provided with the unit.
Handle (not standard on all models)
Some models of wine cooler are shipped with a towel bar-style handle. To
install the handle, you will need a Phillips head screwdriver.
Look at the left side of the door frame, facing outwards. There are two small
holes in the frame. Take the handle and hold it up to the door frame so that
the holes in the handle line up with the holes in the door frame. While holding
the handle with one hand, insert a screw through the top hole in the handle
and screw it into the top hole in the door frame. Then insert a screw in the
bottom hole in the handle and screw it into the bottom hole in the door frame.
Now insert the small "caps" included into the holes in the handle.
Note: On some models, the handle can be installed in either side of the door
frame. To install the handle in the right side of the door frame, use a small flat
head screwdriver to pry the caps out of their holes and follow the above
directions.
Caution: If you do not feel comfortable making this installation yourself, have
a qualified person do the installation for you.
Reversing the Door Swing (not standard on all models)
Your wine cooler comes with the hinges factory installed on the right side, so
the door opens from the left side, swinging open to the right. On some
models, the hinges can be reversed, to swing open from the right. To reverse
the hinges, you need a flat head screwdriver and a Phillips head screwdriver.
Please call service for further instructions about reversing the door swing.
Note: dual door models do not feature reversible doors.
Caution: If you do not feel comfortable reversing the hinges yourself, have a
qualified person do it for you.
Door Lock (not standard on all models)
Some models of wine cooler have a factory installed lock with keys. The lock
is inset into the door. To lock your cooler, insert the key into the lock and turn
the key clockwise until the metal tab is fully extended.
To unlock your cooler, insert the key into the lock and turn counter clockwise
until the metal tab is fully retracted back into the door.
Caution: Make sure to keep the key in a safe place and out of reach of
children- to prevent child entrapment.
Cleaning the Cooler
• Turn the temperature control to "off" and unplug your cooler. Remove
all items from it (wine bottles, shelves, etc.)
• Wash the inside surfaces with a mild cleaner. We suggest you use
either warm water alone, or a baking soda solution (try mixing 2
tablespoons of baking soda into a quart of water.)
• Wash the wire shelves/trays (if you have them) with a mild detergent
solution.
6