How To Clean The Filter; Cleaning The Filter Net; Troubleshooting - Samsung WA13G2Q1 User Manual

HOW TO CLEAN THE FILTER

1. Place a rag under the washer filter not to wet the floor.
2. Rotate the filter counterclockwise
and pull out the filter.
3. Remove dirts and rotate
the filter clockwise
until it locks in position.

CLEANING THE FILTER NET

1. Push the upper part
of the filter and pull in.
1. Push up and
pull out the filter net.
Washing machine won't work
Is the water tap opened?
Is the washer plugged in?
Is the power cut off?
Is there enough water?
Water is not supplied
Is the water tap opened?
Is the water cut off?
Is the water supply hose or hose
connection clogged?
Is the water tap frozen?
If water is not supplied in 1 hour,a
buzzer will sound, and the remaining
time indicator will show "4E / 7E".
Clean the filter net often to keep the washer clean.
2. Open the cover as
shown in the figure.
2. Remove the collected
lint from the filter net.

TROUBLESHOOTING

(pump drained washer)
1.Place a rag under washer filter not to wet the floor.
2.Turn the filter-cap to the left.
3.Take the filter out and
remove dirts.
4. Reassemble in
reverse order.
3. Clean the filter.
3. Clean the filter.
Water dose not drain
Is the drain hose down?(No pump)
Is the drain hose frozen?
Is the drain hose clogged?
If the water dose not drain in 15
minutes, a buzzer will sound,
and the remaining time indicator
will show "E / 5E".
Spinning does not work
Is the laundry spread out evenly
in the washer?
Is the washer set on a sturdy
flat surface?
Water is overflowed
Restart after spinning.
If the error sign still indicates,
call agency.
10
4. Close the cover and insert the
lower part of the filter in the
basket first and then push the
filter with "click" sound .
4. Pull down the filter net.