Troubleshooting - Samsung VC-7423V Operating Instructions Manual

DA68-00006E(EN+HU)0.4
USAGE OF FLOOR NOZZLE
FOR RUG / FLOOR SELECTOR
Before use make sure that the position of the selector is in the right position for
the type of surface to be cleaned.
Select the carpet indicator when cleaning carpets.
Select flat surface indicator
FOR UNIVERSAL BRUSH
Use the floor nozzle for all cleaning surfaces.
NOTE: For optimum efficiency, clean floor brush with crevice tool.
TROUBLE SHOOTING
PROBLEM
Motor does not start. No power supply.
Suction force is gradually Filter, nozzle, suction hose
decreasing. or tube is blocked.
Cord does not rewind fully. Check that the cord is not
twisted or wound unevenly.
This Vacuum cleaner is approved the following
EMC Directive : 89/336/EEC, 92/31EEC and 93/68/EEC
Low Voltage Safety Directive : 73/23/EEC and 93/68/EEC
7/30/03 3:24 PM Page 8
when cleaning the floors, tiles, etc.
CAUSE REMEDY
Check cable, plug and
socket.
Remove the object.
Pull the cord out 2~3m &
push down the cord rewind
button.
7