Samsung VC-6813VN Operating Instructions Manual page 4

D00053T(EN)-(0.0) 5/12/03 2:18 PM
ASSEMBLING THE VACUUM-CLEANER SO THAT IT IS READY FOR USE
1. Slide the free end of the extension wand into the nozzle tube.
2. Slide the narrow end of one extension wand into the other
extension wand.
3. Slide the extension wand into the handle end of the hose.
4. Slide the hose clamp into the suction inlet of the unit.
* Option Assemble the CYCLONIC FILTER with the handle
and extension wand(depending on model).
Ajusting the telescopic tubes (depending on model).
USAGE OF FLOOR NOZZLE
FOR RUG / FLOOR SELECTOR
Before use make sure that the position of the selector is in the right position for the type of surface to be
cleaned.
Select the carpet indicator
when cleaning carpets.
FOR UNIVERSAL BRUSH
Use the floor nozzle for all cleaning surfaces.
NOTE:
For optimum efficiency, clean floor brush with crevice tool.
Page 4
EXTENDING : Holding narrow
side of the telescopic tube with a
hand, pull the hadle to the oppo-
site side of it with another hand.
SHORTENING : Push the handle
to the narrow side
of the tube, hoding
it with another
hand.
Select flat surface indicator
when cleaning the floors,
tiles, etc.
3
EN
*OPTION
*OPTION