Auto Repeat Play; Interval Repeat Play; Using The Tape Counter - Samsung SV-667I Instruction Manual

Auto Repeat Play

GB
PROG OPTIONS INSTALL
CLOCK BONUS BONUS LANG
EASY OPERATION
➛❿
OK END: MENU
❷
BONUS
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
❿
END: MENU
❷

Interval Repeat Play

PROG OPTIONS INSTALL
BONUS
CLOCK BONUS LANG
EASY OPERATION
➛❿
OK END: MENU
❷
BONUS
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
❿
END: MENU
❷
34
You can set repeat play to repeat the tape continuously from
beginning to end.
1 Press MENU on the remote control.
Result: The programming menu is displayed.
2 or ➛, ❿ buttons to select the
Press the corresponding ,
❷
EASY OPERATION option.
3
Press the OK button to select this option.
Result: The EASY OPERATION menu is displayed.
4
Press the corresponding or buttons, until the
❷
REPEAT PLAY option is selected.
5 Press ➛ or ❿, until...
To...
Repeat play ON is displayed.
Do not wish to repeat play OFF is displayed.
6
On completion, press MENU twice to exit the menu.
You can set interval repeat play to repeat the cassette several times
for special interval.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2 or ➛, ❿ buttons to select the
Press the corresponding ,
❷
EASY OPERATION option.
3 Press the OK button to select this option.
Result: The EASY OPERATION menu is displayed.
4 Press the corresponding or buttons, until the
❷
option is selected.
NO. OF INTERVAL REPEAT
5 Press ❿, until...
To...
Interval repeat play 5, 10, 15 is displayed.
(choose repeat time 5 times,
10 times, 15 times)
Cancel interval repeat play OFF is displayed.
6 On completion, press MENU twice to exit the menu.
7 To select interval during playback, press the INPUT/REPEAT
button at the desired start point.
Result: " INTERVAL REPEAT SETTING " is displayed.
Press the INPUT/REPEAT button one more time at the desired
end point.
Result: The tape is automatically rewound to the start point.
" INTERVAL REPEAT " is displayed.

Using the Tape Counter

The tape counter:
Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
Is reset when a cassette is inserted in the VCR
Allows you to find the beginning of a sequence easily
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1
Insert a cassette in your VCR.
2
To set the tape counter to zero at the beginning of a sequence:
Press DISP./ or DISPLAY twice to display the counter
Press CLR/RST when you want to set the tape counter to
zero
3
When you are ready,
Start playback or Recording.
Press the button.
To fast-froward or rewind to the sequence at which the
➛ ➛ ❿ ❿
counter was set to zero, press or .
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 16).
Press DISP./ or DISPLAY:
Once to display the current function, programme
number, recording speed, date, time and counter
Twice to display the counter only
Three times to display the time remaining on the
cassette
Four times to clear the display
GB
0:00:00
(SV-667I/SV-466I) (SV-266I/SV-262I)
CLR/RST F.ADV INDEX CLR/RST F.ADV INDEX
-/--
SELECT
TV VCR INPUT A.TRK IPC INPUT
2
2
REPEAT REPEAT
AUDIO DISP./ UDIO DISPLAY
VOL PROG/TRK TRK PROG
2 2
REC MENU REC MENU
35