Auto Repeat Play; Interval Repeat Play; Using The Tape Counter - Samsung SV-640B/XSA Instruction Manual

Auto Repeat Play

You can set repeat play to repeat the tape continuously from
beginning to end.
(SV-640B/SV-245B)
1
Press MENU on the remote control.
BONUS
Result:
G-CODE EXTEND :OFF
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
2
Press the corresponding
NO. OF
EASY OPERATION
INTERVAL REPEAT : 5
3
Press the OK button to select this option.
❿ END: MENU
$ ❷
Result:
4
Press the corresponding
(SV-445B/SV-240B)
REPEAT PLAY
5
To...
BONUS
AUTO POWER OFF :OFF
REPEAT PLAY :OFF Repeat play
NO. OF
INTERVAL REPEAT : 5
Do not wish to repeat play
6 On completion, press MENU twice to exit the menu.
❿ END: MENU
$ ❷

Interval Repeat Play

You can set interval repeat play to repeat the cassette several times
for special interval.
1
Press MENU on the remote control.
(SV-640B/SV-245B)
Result:
2
Press the corresponding
EASY OPERATION
BONUS
G-CODE EXTEND :OFF
AUTO POWER OFF :OFF 3
Press the OK button to select this option.
REPEAT PLAY :OFF
Result:
NO. OF
INTERVAL REPEAT : 5
4 Press the corresponding
NO. OF INTERVAL REPEAT
❿ END: MENU
$ ❷
5
To...
Interval repeat play
(SV-445B/SV-240B)
BONUS
Cancel interval repeat play
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
6
NO. OF On completion, press MENU twice to exit the menu.
INTERVAL REPEAT : 5
7
To select interval during playback, press the INPUT/REPEAT
button at the desired start point.
Result:
❿ END: MENU
$ ❷
Press the INPUT/REPEAT button one more time at the desired
end point.
Result:
34
The programming menu is displayed.
or ➛, ❿ buttons to select the
,
$ ❷
option.
The EASY OPERATION menu is displayed.
or buttons, until the
$ ❷
option is selected.
Press ➛ or ❿, until...
ON is displayed.
OFF is displayed.
The programming menu is displayed.
or ➛, ❿ buttons to select the
,
$ ❷
option.
The EASY OPERATION menu is displayed.
or buttons, until the
$ ❷
option is selected.
Press ❿, until...
5, 10, 15 is displayed.
(choose repeat time 5 times,
10 times, 15 times)
OFF is displayed.
" INTERVAL REPEAT SETTING " is displayed.
The tape is automatically rewound to the start point.
" INTERVAL REPEAT " is displayed.
G-CODE EXTEND (SV-640B/SV-245B Only)
To prevent delays or over-runs the VCR has a function called
G-CODE EXTEND allowing you to extend the recording time by up
to 60 minutes.
1
Press the MENU button on the remote control.
2 or ➛, ❿ buttons to select the
Press the corresponding ,
$ ❷
EASY OPERATION option.
3
Press the OK button to select this option.
Result: The EASY OPERATION menu is displayed.
4
Press the corresponding or buttons, until the
$ ❷
G-CODE EXTEND option is selected.
5 Press ➛ or ❿ buttons to set the G-CODE EXTEND time by
increments of 10 minutes.
6 To turn off, press ➛ or ❿ buttons repeatedly until
OFF

Using the Tape Counter

The tape counter:
Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
Is reset when a cassette is inserted in the VCR
Allows you to find the beginning of a sequence easily
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1 Insert a cassette in your VCR.
2 To set the tape counter to zero at the beginning of a sequence:
Press DISP./ or DISPLAY twice to display the counter
Press CLR/RST when you want to set the tape counter to
zero
3 When you are ready,
Start playback or Recording.
Press the button.
To fast-froward or rewind to the sequence at which the
counter was set to zero, press ➛ ➛ or ❿ ❿ .
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 15).
Press DISP./ or DISPLAY:
Once to display the current function, programme
number, recording speed (SV-640B/SV-445B only),
date, time and counter
Twice to display the counter only
Three times to display the time remaining on the
cassette
Four times to clear the display
PROG OPTIONS INSTALL
BONUS
CLOCK BONUS LANG
EASY OPERATION
➛❿!! OK END: MENU
$ ❷!!
BONUS
G-CODE EXTEND :OFF
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
shows.
NO. OF
INTERVAL REPEAT : 5
❿ END: MENU
$ ❷
0:00:00
(SV-640B/SV-445B/
(SV-240B)
SV-245B)
CLR/RST F.ADV INDEX CLR/RST F.ADV INDEX
-/--
SELECT
A.TRK IPC INPUT
TV VCR INPUT
2 2
REPEAT REPEAT
AUDIO DISP./ UDIO DISPLAY
VOL PROG/TRK TRK PROG
2 2
REC MENU
REC MENU
35
GB