Selecting The Cassette Type; Selecting The Recording Speed; Nicam (Sv-670 Only) - Samsung SV-270 Instruction Manual

Selecting the Cassette Type

If you wish to use the tape counter to display the time
remaining on a cassette, you must indicate the type of
cassette inserted.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the USER SET option.
3
Press the OK button to select this option.
4
Press the corresponding
TAPE SELECT option is selected.
OPTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
❿
END:
❷
➛ ❿
5
Press the or buttons as many times as
required, until the correct cassette length is
displayed.
E180 E240
E 300 E260
6
Press MENU twice to exit the menu.

Selecting the Recording Speed

You can record a cassette at two different speeds:
SP (Standard Play)
LP (Long Play)
In Long Play modes:
Each cassette lasts twice as long
To record a cassette... Press the SPEED button on
the remote control, until...
In standard play mode SP is displayed.
In long play mode LP is displayed.
Type Recording Time (in SP)
E-180 180 mins. or 3 hours
E-240 240 mins. or 4 hours
E-260 260 mins. or 4 hours and 20 mins.
E-300 300 mins. or 5 hours
➛ ❿
,
or , buttons to
❷
or buttons, until the
❷
MENU
ENG-16
NICAM
(SV-670 Only)
NICAM programmes are divided into 3 types. NICAM
Stereo, NICAM Mono and Bilingual (transmission in
another language). NICAM programmes are always
accompanied by a standard mono sound broadcast and
you can select the desired sound. Please refer to page 21.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the USER SET option.
OPTIONS
PROG OPTIONS INSTALL
CLOCK BONUS LANG
USER SET
➛❿
OK END:
❷
3
Press the OK button to select this option.
Result: The USER SET menu is displayed.
4
Press the corresponding
NICAM option is selected.
OPTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
FORMAT 16:9 :AUTO
NICAM :ON
IPC :ON
❿
END:
❷
➛
5
To... Press
Mono mode OFF is displayed.
OFF: Only set at this position to record
the standard mono sound during
a NICAM broadcast if the stereo
sound is distorted due to inferior
reception conditions.
NICAM mode ON is displayed.
ON: Normally set at this position.
6
On completion, press MENU twice to exit the menu.
➛ ❿
,
or , buttons to
❷
MENU
or buttons, until the
❷
MENU
❿
or , until...