Auto Power Off - Samsung SV-261GX Instruction Manual

Using the TV Buttons on the Remote Control (SV-665GX Only)
Your VCR remote control will work with Samsung
televisions and compatible brands.
To determine whether your television is compatible,
follow the instructions below.
1
Switch your television on.
2 Point the remote control towards the television.
3
Hold down the TV button and enter the two-figure
code corresponding to the brand of your television,
by pressing the appropriate numeric buttons.
Brand Codes Brand
SAMSUNG 01 to 06 PHILIPS
AKAI 09, 23 SABA
GRUNDIG 09, 17, 21 SONY
LOEWE 02 THOMSON 13, 14, 24
PANASONIC 08, 23 to 27 TOSHIBA
GB
Result: If your television is compatible with the
remote control, it is switched off. It is now
programmed to operate with the remote
control.
If several codes are indicated for your television
brand, try each one in turn until you find one that
works.
When you change the batteries in the remote
control, you must reprogramme the code,
following the same procedure.
26
You can then control the television using the following
buttons.
Button Function
TV STANDBY/ON Used to switch the television on
and off.
TV or VCR Used to switch between the TV
and VCR modes. Only the VOL
+ –
( or ) and TV STANDBY/ON
buttons are operational in VCR
mode.
-/-- Used to enter a two-figure
Codes
programme number.
Example: For programme 12,
02, 20, 22
press -/-- followed by numeric
13, 14, 22 to 24
buttons 1 and 2.
15, 16
INPUT Used to select an external
source.
07, 16 to 19, 21
+ –
VOL or Used to adjust the volume of the
television.
PROG/TRK Used to select the required
( or ) programme.
DISP./ Used to switch between an external
source and the television tuner.
The various functions will not necessarily
work on all televisions. If you encounter
problems, operate the television directly.

Auto Power Off

The Auto Power Off feature automatically turns off
your VCR if no signal is received and you do not
press any button for the selected time.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding , or , buttons to
select the EASY OPERATION option.
3
Press the OK button to select this option.
Result: The EASY OPERATION menu is displayed.
4
Press the corresponding or buttons, until the
AUTO POWER OFF option is selected.
5 Press the button, until you select the time of Auto
Power off interval.
OFF 2HOUR 3HOUR
6 On completion, press MENU twice to exit the menu.
Technical Specifications
Design and specifications are subject to change without notice.
MODEL SV-665GX/SV-661GX
Format VHS PAL standard
Heads Video: 4 rotary heads
Hi-Fi audio: 2 rotary heads
Audio/Control: 1 stationary head
Erase: 1 full track erase head
Receiving channel VHF-I, VHF-III, UHF, Interband/Hyperband
Television system STANDARD B/G-D/K-A2/NICAM
Luminance FM azimuth recording
Colour system PAL/MESECAM/NT4.43: Down converted subcarrier PAL/MESECAM/NT4.43: Down converted subcarrier
phase shifted direct recording NTSC PB on PAL TV phase shifted direct recording NTSC PB on PAL TV
Tape speed SP 23.39 mm/sec
LP 11.69 mm/sec
Recording/playback time SP 3 hours (E-180 Tape)
LP 6 hours (E-180 Tape)
REW time About 60 sec in REW with E-180
VIDEO
Input 0.5 to 2.0 Vp-p; 75 ohm unbalanced
Output 1.0 ± 0.2 Vp-p; 75 ohm unbalanced
Signal-to-noise ratio Better than 43 dB (SP)
Horizontal resolution More than 240 lines
AUDIO
Input -8 dBm, 47 Kohm unbalanced
Output -8 ± 3 dBm, 1 Kohm unbalanced
Wow and flutter (WTD) 0.4% max (SP)
Signal-to-noise ratio 68 dB min (IHF A filter)
Frequency response 20Hz - 20kHz
Power requirement 220-240V~ 50Hz
Power consumption Approx. 17 watts
Operation temperature 41°F-104°F (5°C-40°C)
Operation humidity 10%-75%
Weight 2.8 Kg (net)
Dimensions (WxHxD) 360 x 94 x 240 mm
ECO Mode-Reducing Standby
power consumption
Low Power Mode reduces the Standby power
consumption of the VCR when in Standby mode.
Useful, for example, when you are away from the
house on holiday. It saves actually turning the VCR off.
1 Press MENU on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding , or , buttons to
select the USER SET option.
3
Press the OK button to select this option.
Result: The menu is displayed.
USER SET
4
Press the corresponding or buttons, until the
ECO. MODE is selected.
5
Press the button to turn LOW(3Watts) mode on.
Now, when the VCR is standby mode the front
display panel will shut off. Even the clock disappears.
By pressing the VCR STANDBY/ON (STANDBY/ON)
button again the display panel will reappear.
6
On completion, press MENU twice to exit the menu.
SV-465GX/SV-461GX/SV-265GX/SV-261GX
VHS PAL standard
Video: 4 rotary heads (SV-465GX/SV-461GX)
Video: 2 rotary heads (SV-265GX/SV-261GX)
Audio/Control: 1 stationary head
Erase: 1 full track erase head
VHF-I, VHF-III, UHF, Interband/Hyperband
STANDARD B/G-D/K
FM azimuth recording
SP 23.39 mm/sec
LP 11.69 mm/sec (SV-465GX/SV-461GX)
SP 3 hours (E-180 Tape)
LP 6 hours (E-180 Tape) (SV-465GX/SV-461GX)
About 60 sec in REW with E-180
0.5 to 2.0 Vp-p; 75 ohm unbalanced
1.0 ± 0.2 Vp-p; 75 ohm unbalanced
Better than 43 dB (SP)
More than 240 lines
-8 dBm, 47 Kohm unbalanced
-8 ± 3 dBm, 1 Kohm unbalanced
0.4% max (SP)
42 dB min (IHF A filter)
100Hz - 8kHz
220-240V~ 50Hz
Approx. 15 watts
41°F-104°F (5°C-40°C)
10%-75%
2.8 Kg (net)
360 x 94 x 240 mm
27
GB