Advertisement
• WARNING
In order for this Torker-Plus cam and lifter kit to be covered under ANY WARRANTY you MUST use the correct Edelbrock Sure Seat Valve Springs.
The end flap or label from your Sure Seat Valve Spring box must be sent in with your camshaft warranty card.
Failure to install new Edelbrock Sure Seat Valve Springs with your new Torker-Plus cam and lifter kit could cause the cam lobes to wear exces-
sively and could cause additional engine damage. IF YOU HAVE ANY QUESTIONS ABOUT THIS APPLICATION, PLEASE CONTACT OUR TECHNICAL
DEPARTMENT IMMEDIATELY.
• CAUTION: Use Edelbrock Performer-Link Timing Chain and Gear Set #7800 or Accu-Drive gear drive #7890. Do not use late model timing chain
and gear sets that are designed for emission-controlled engines. These timing sets are machined in a retarded position and are not recommend-
ed for this camshaft installation. Edelbrock Timing Sets feature three keyways for specific timing selection.
Figure 1- Chevrolet 265-400 c.i.d. V8
Firing Order 1-8-4-3-6-5-7-2
Turn distributor counter-clockwise to advance timing.
©2008 Edelbrock Corp
TIMING
MARKS
Figure 2- Timing Chain Sprocket Alignment
Rev 9/08 - AJ/mc
Brochure #63-5002
Advertisement
