Rear Panel Jacks - Samsung CT-21M7W Owner's Instructions Manual

02647B(E)-CHAPTER 1 2/7/03
Y
O U R

Rear Panel Jacks

Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
Because there are two sets of input jacks, you can connect two different A/V
components (i.e., a VCR and a DVD, 2 VCRs, etc.)
For more information on connecting equipment, see pages 2.1 – 2.7.
ΠAUDIO-VIDEO MONITOR
´ VIDEO INPUT
ˇ AUDIO INPUTS
¨ DVD AUDIO INPUTS
1.4
C O : Y N
HAPTER NE OUR
9:40 AM Page 4
N T V
E W
OUTPUTS
These audio-video signals are identical to A/V
signals being displayed on the big screen.
(Typically used as the input signals for a record-
ing VCR.)
Video signals from VCRs, DVD players and similar
devices.
Audio signals from VCRs, DVD players and similar
devices.
Use these jacks to connect the audio signals
from a DVD player when using the DVD video
input jacks. When not using the DVD jacks, these
audio jacks function as audio for Video 2 or S-
VIDEO.
TV
EW
ˆ S-VIDEO INPUT
(CT21M7W/CT21S8W)
Connect to an S-VHS VCR or DVD player.
Ø DVD VIDEO INPUT
Connect video from a DVD player.
Note: Monitor Output doesn't operate in the DVD
mode.
∏ VHF/UHF
Connect to an antenna or to a cable TV system.
(INPUT 2)