Connecting A Vcr - Samsung CT-17M16MQ Owner's Instructions Manual

AA68-03381A-00_XTC_ENG
I
N S TA L L AT I O N

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable
TV system (according to the instructions on pages 9-12). Skip step 1 if you have not yet
connected to an antenna or a cable system.
1
Unplug the cable or anten-
na from the back of the TV.
2
Connect the cable or
antenna to the
ANTENNA IN terminal on
the back of the VCR.
3
Connect a coaxial cable
between the ANTENNA
OUT terminal on the VCR
and the antenna
terminal on the TV.
A coaxial cable is usually included with a VCR. (If not, check your local electronics
store).
4
Connect a set of audio
cables between the AUDIO
OUT jacks on the VCR and
the AUDIO jacks on the TV.
5
Connect a video cable
between the VIDEO OUT
jack on the VCR and the
VIDEO jack on the TV.
Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape.
4/19/04 6:08 PM Page 13
Incoming
Cable or
Antenna
VCR Rear Panel
VCR Rear Panel
Coaxial Cable
VCR Rear Panel
Audio Cable
VCR Rear Panel
Video Cable
English - 13
TV Rear Panel
TV Rear Panel
TV Rear Panel