Connecting A Camcorder - Samsung CT-17M16MQ Owner's Instructions Manual

AA68-03381A-00_XTC_ENG
I
N S TA L L AT I O N

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow
you to view the camcorder tapes without using a VCR. (Also see "Viewing a VCR or
Camcorder Tape" on page 31.)
1
Locate the A/V output jacks
on the camcorder. They are
usually found on the side or
back of the camcorder.
2
Connect an audio cable
between the AUDIO OUT-
PUT jack on the camcorder
and the AUDIO terminals
on the side of the TV.
3
Connect a video cable
between the VIDEO OUT-
PUT jack on the camcorder
and the VIDEO terminal on
the side of the TV.
The audio-video cables shown here are usually included with a Camcorder. (If not, check
your local electronics store.) If your camcorder is stereo, you need to connect a set of two
cables.
4/19/04 6:08 PM Page 15
Camcorder
Output Jacks
Camcorder
Output Jacks
Camcorder
Output Jacks
Audio Cable Y-Connector
Video Cable
English - 15
TV Side Panel
TV Side Panel