Advertisement
HOW TO ASSEMBLE
Fit the part, while pressing it,
into part.
Insert part and part into
part.
Insert ®Á part while pressing the
lower end of ® A part.
25
part
part
part
part
part
Fit the locking part of part into
the hole of part.
Insert the long portion of part into
the hole of part.
• At this time, the popping portion of part has to
be fitted into the grooves of part.
• Be careful not to recklessly pull out spring
or not to make the spring stretched.
• Water leakage may be caused by filling
water tank with water or by pressing water
supply lever if rubber packing or rubber
ring were missing while assembling.
Assemble all parts in steps without missing
any one of them.
part
part
Hole
part
Popping porting
part
Hide quick links:
Advertisement
