Table of Contents
Advertisement
Selecting the Cassette Playback
Mode (Deck 2 Only)
Your mini-compact system has three cassette playback modes
which enable you to listen to both sides of a cassette auto-
matically.
Press REV. Mode until the appropriate symbol is displayed.
When the display indicates... The mini-compact system plays back...
One side of the selected cassette and
then stops.
One side of the cassette.
The other side of the cassette and then
stops.
Both sides of the cassette indefinitely until
you press stop.
MAX-L45 FUNCTION
Timer Function
The timer enables you to switch the system on or off at spe-
cific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off auto-
matically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing On/Standby.
2
Press Timer/Clock until
3
Press Enter.
Result: ON TIME is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
4
Set the timer switch-on time.
a
Set the hour by tuning the Multi Jog knob to the right or to the left.
b
Press Enter.
Result: The minutes flash.
c
Set the minutes by tuning the Multi Jog knob to the right or to
the left.
d
Press Enter.
Result: OFF TIME is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
TIMER is displayed.
5
Set the timer switch-off time.
a
Set the hour by tuning the Multi Jog knob to the right or to the left.
b
Press Enter.
Result: The minutes flash.
c
Set the minutes by tuning the Multi Jog knob to the right or to
the left.
d
Press Enter.
Result: VOL XX is displayed, where XX corresponds to the
volume already set.
6
Press Tuning Down and Up to adjust the volume level and press
Enter.
Result: The source to be selected is displayed.
7
Turn the Multi Jog knob to select the source to be played when the
system switches on.
If you select...
You must also...
TAPE (cassette)
Insert a recorded cassette in one of the
decks before setting the system to standby.
TUNER (radio)
a Press
b Select a preset station by tuning the
CD (compact disc)
a Load one or more compact discs.
b Select the required disc.
8
Press Enter to confirm the timer.
9
Press On/Standby to set the system to standby mode.
Result:
is displayed to the bottom left of the time, indicating that
the timer has been set. The system will switch on and off
automatically at the required times.
If the timer switch on and off times are identical, the word ERROR is
displayed.
1,9
6
2
To set the timer function
You may use Multi Jog or
step 4,5,6,7.
You can also use Program/Set button on the remote
control to instead Enter button in step 3,4,5,6,7,8.
Enter
.
Multi Jog
knob to the right or to the left.
6
3,4,5,6,7,8
4,5,7
/
buttons to adjust in
19
GB
Hide quick links:
Advertisement
Table of Contents
