Connecting External Components - Samsung HT-DS900 Instruction Manual

1p~40p(DS700)-GB-NOR 2004.3.10

Connecting External Components

Connecting an External Digital Component
Example: Digital signal components such as a Set-Top Box or CD Recorder.
IMPEDANCE SUBWOOFER : 4Ω
FRONT / CENTER / REAR : 4Ω
REAR FRONT
CENTER
L L
SUBWOOFER REAR FRONT
R R
1
Connect the Digital Input (OPTICAL) to the Digital Output on the external
digital component.
2
Press AUX on the remote control to select 'DIGITAL IN'.
•
Each time the button is pressed, the selection changes as follows: DIGITAL IN
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD DIGITAL IN
15
9:32 AM Page 18
Optical Cable
(not included)
DIGITAL OUT
AUX 1 AUX 2.
AUX1 AUX2 FM AM.
Connecting an External Analog Component
Example: Analog signal components such as a VCR or TV.
IMPEDANCE SUBWOOFER : 4Ω
FRONT / CENTER / REAR : 4Ω
REAR FRONT
CENTER
L L
The AC Cord must be plugged into an
appropriate socket.
Before plugging your system into an AC outlet,
REAR FRONT
SUBWOOFER
R R
you must check the voltage.
Audio Cable
Check the position of the voltage selector on
the rear of the system (OPTIONAL). If the external analog
component has only one
1. Plug the AC Cord on the rear of the system
Audio Out, connect either
into an appropriate outlet.
2. Press the On/Standby button to switch your
left or right.
DVD Player system on.
1
Connect Audio In on the DVD player to Audio Out on the external analog component.
•
Be sure to match connector colors.
2
Press AUX on the remote control to select AUX 1 or AUX 2.
•
Each time the button is pressed, the selection changes as follows: DIGITAL IN
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD DIGITAL IN
AUX 1 AUX 2.
AUX1 AUX2 FM AM.
16