Connecting External Components
Connecting an External Digital Component
Example: Digital signal components such as a Settop Box or CD Recorder.
1
Connect Video Out on the DVD player to Video In on the TV.
2
Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
3
Press AUX on the remote control to select 'DIGITAL IN'.
•
Each time the button is pressed, the selection changes as follows: DIGITAL IN
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD
DIGITAL IN
17
Optical Cable
(not included)
AUX 1
AUX 2.
AUX1
AUX2
FM
AM.
Connecting an External Analog Component
Example: Analog signal components such as a VCR or TV.
Video Cable
1
Connect Video Out on the DVD player to Video
In on the TV.
2
Connect Video In on the DVD player to Video
Out on the external analog component.
3
Connect Audio In on the DVD player to Audio Out
on the external analog component.
•
Be sure to match connector colors.
4
Press AUX on the remote control to select AUX 1 or
AUX 2.
•
Each time the button is pressed, the selection changes as
follows: DIGITAL IN
AUX 1
AUX 2.
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD
DIGITAL IN
AUX1
AUX2
FM
AM.
Audio Cable
If the external analog
component has only one
Audio Out, connect
either left or right.
Note
•
If you have connected an external digital
component and also an Analog
component to Video In (1, 2) at the same
time, there will be video from AUX 1 even
when you select DIGITAL IN.
•
If you have connected Audio In (L, R) to
1, connect Video In to 1 as well, and if
you have connected Audio In (L, R) to 2,
connect Video In to 2 also.
•
When you select Aux 1 or 2, you are
selecting Video 1 or 2 inputs respectively.
18