Using The Tv Buttons On The Remote Control - Samsung CHT-200 Instruction Manual

VCR
GB
STANDBY/ON
SCREEN FIT
SVHS
2
DVD VCR
TV VOL.
DVD VCR
TV VOL.
4
4
OPEN/CLOSE MUTE
DVD VCR
TV VOL.
5
5
OPEN/CLOSE MUTE
OPEN/CLOSE MUTE
MENU INFO.

Using the TV Buttons on the Remote Control

TV
STANDBY/ON
1
ATR
ZOOM
SELECT
2
TV INPUT
PROG/TRK AMP VOL.
TV INPUT
PROG/TRK AMP VOL.
3
F.ADV / STEP AUDIO
TV INPUT
PROG/TRK AMP VOL.
F.ADV / STEP AUDIO
F.ADV / STEP AUDIO
6
RETURN
CLEAR
/A. DUB
40
Your DVD-VCR remote control will work with Samsung televisions
and compatible brands.
To determine whether your television is compatible, follow the instructions
below.
1
Switch your television on.
2
Point the remote control towards the television.
3
Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
Brand Codes
SAMSUNG 01 to 06
AKAI 09, 23
GRUNDIG 09, 17, 21
LOEWE 02
PANASONIC 08, 23 to 27
Result: If your television is compatible with the remote control, it
will switch off. It is now programmed to operate with the
remote control.
If several codes are indicated for your television brand, try
each one in turn until you find one that works.
When you change the batteries in the remote control, you
must reprogramme the code, following the same procedure.
You can then control the television using the following buttons.
Button Function
TV STANDBY/ON Used to switch the television on and off.
TV or VCR Used to switch between the TV and VCR modes.
INPUT Used to select an external source.
+ –
TV VOL or Used to adjust the volume of the television.
PROG/TRK Used to select the required programme.
( or )
MUTE Used to mute the volume of the television.
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television directly.
Brand Codes
PHILIPS 02, 20, 22
SABA 13, 14, 22 to 24
SONY 15, 16
THOMSON 13, 14, 24
TOSHIBA 07, 16 to 19, 21