Table of Contents
Advertisement
ENGLISH
ENGLISH
Playing a Disc
Before Play
After plugging in the player, the first time you press the POWER button, this screen comes up:
Press the UP/DOWN buttons to select the language, and then press the ENTER button.
(This screen will only appear when you plug in the player for the first time.)
If you don't select language, at first time, setting value of Setup menu will be lost.
Play
1. Press the OPEN button to open the disc cover.
• The disc cover opens up to around a 60-degree angle.
Do not attempt to open the cover to an angle beyond this range. The cover may become damaged.
2. Place a disc gently into the tray.
• You should hear and feel the disc snap firmly into place.
Caution
• Place a disc into the tray with the disc's label facing up.
3. Close the disc cover and then press the part marked "PUSH" until it clicks shut.
4. Stopping Play
• Press the STOP (
) button during play.
5. Pausing Play
Press the PAUSE (
) button on the remote during play.
- Screen stops, no sound.
- To resume, press PLAY (
) button once again.
28
Playing a Disc
6. Step Motion Play (Except CD)
Press the PAUSE (
)/STEP button on the remote during play.
- Each time the button is pressed, a new frame will appear.
- No sound is heard during STEP mode.
- Press PLAY (
) to resume normal play.
(You can only perform step motion play in the forward direction.)
7. Slow Motion Play (Except CD)
Press the
button on the remote during PAUSE or STEP mode. By pressing the
1/4 or 1/2 of normal speed.
Press and hold the
button to choose the play speed between 1/8, 1/4 and 1/2 of normal during PAUSE or STEP mode.
- No sound is heard during slow mode.
- Press PLAY (
) to resume normal play.
NO
NOTE:
TE: Reverse slow motion play will not work.
RESUME function
When you stop disc play, the player remembers where you stopped, so when you press PLAY (
it will pick up where you left off. (unless the disc is removed or the player is unplugged, or if you pressed the STOP (
Important!
• Make sure that the disc is correctly placed. Otherwise, the disc and/or the DVD player may be damaged.
• If the disc is placed upside down in the disc tray or the region number of the DVD is not supported, No Disc will appear on the screen.
NO
NOTE:
TE:
• If the player is left for 5 minutes in pause mode, it will stop.
• If the player is left in the stop mode for more than one minute without any user interaction, a screen saver will be activated.
Press the PLAY (
) button to resume normal play.
• If the player is left in the stop mode for more than 5 minutes, the power will automatically shut off. (Automatic Power-Off Function)
• This
icon indicates an invalid button press.
• Do not remove the disc until it has completely stopped.
• Press the POWER button for 1 second to power off.
ENGLISH
ENGLISH
button, you can select slow motion play for 1/8,
) again,
) button twice.)
29
Advertisement
Table of Contents
