Samsung DVD-R100 Quick Setup Manual page 2

Antenna + Set-Top Box or VCR + DVD Recorder + TV
We recommend using one of the discs in the table as they have
been confirmed to be compatible with this unit.
Other discs may not perform correctly.
Media Brand
TDK
That's
DVD-R Maxell
Panasonic
Ritek
Verbatim
JVC
DVD-RW
Radius
TDK
MCC
MEI
DVD-RAM Fuji
Maxell
TDK
DVD Recorder
TV
Speed
4x
4x
4x
4x
4x
2x
2x
2x
2x
2x
2x
2x
2x
2x
English-2
Connect the signal source to the STB or VCR
Use a TV antenna or coaxial cable to connect the signal source
coming from the antenna or wall to the VHF/UHF RF IN jack on the
STB or VCR.
Connect the STB or VCR to the DVD Recorder
Use the Video/Audio Cable to connect the LINE OUT jacks on the
STB or VCR to the AUDIO/VIDEO LINE 1 IN jacks on the DVD
Recorder.
For better picture quality, if your STB or VCR has an S-Video
jack, you can use S-Video cable instead of the yellow video jack
on the Video/Audio cable.
Connect the DVD Recorder to the TV
Use the Video/Audio Cable to connect the ANALOG AUDIO
OUT(R/L)/VIDEO OUT jacks on the DVD Recorder to the Audio &
Video jacks on the TV.
For better picture quality, if your TV has an S-Video jack, you can
use S-Video cable instead of the yellow video connector on the
Video/ Audio cable.
For the best picture quality, if your TV has Component video jacks,
you can use Component cables instead of the yellow video
connector on the Video/Audio cable.
If you have an AV amplifier
Connect either audio cables from the ANALOG AUDIO OUT jacks
on the DVD Recorder to the LINE IN jacks on your AV amplifier, or
a digital cable from the DIGITAL AUDIO OUT (COAXIAL or OPTI-
CAL) jack on the DVD Recorder to the DIGITAL AUDIO IN jack on
your AV amplifier.