Connecting Dvd-Vcr To The Tv Using The Coaxial Cable; Connecting Dvd-Vcr To The Tv Using The Rca Cable - Samsung DVD-V80 Instruction Manual

Deciding How to Connect DVD-VCR
You must take into account various factors when connecting audio or video systems:
Types of connectors available on your systems
Systems connected permanently to the DVD-VCR (satellite receiver for example) or temporarily
(camcorder for example)
Your DVD-VCR is equipped with the following connectors.
Connector Location Type Direction
LINE 1 Rear Audio/Video RCA In/Out
Audio output Rear Audio RCA Out
LINE 2 Front LINE 2 In
Audio/Video
COMPONENT Rear RCA Out
output
S-VIDEO Rear S-JACK Out
output
Digital AUDIO Rear Optical Out
(DVD-V80/ DVD-V85)
output coaxial
OUT TO TV Rear 75 Out
coaxial
IN FROM ANT. Rear 75 In
coaxial
Whenever you connect an audio or video system to your DVD-VCR, ensure that all elements are
switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions and
associated safety precautions.
12
Recommended Use
Television
Other VCR
Audio out (DVD only)
Audio in
Video in
COMPONENT out (DVD only)
S-Video out (DVD only)
Digital Audio out (DVD only)
Television
Aerial
Cable television network
Satellite receiver

Connecting DVD-VCR to the TV using the Coaxial Cable

To receive television programmes a signal must be received from
one of the following sources:
An outdoor aerial
An indoor aerial
A cable television network
A satellite receiver
Make sure that both the television and the DVD-VCR are
switched off before connecting the cables.
1
Remove the aerial or network input cable from the television.
2 Connect this cable to the 75 coaxial socket marked
rear of your DVD-VCR.
3
Plug the coaxial cable supplied into the TV socket on your
DVD-VCR.
4
Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
5
To obtain better quality pictures and sound on your television, you
can also connect your DVD-VCR to the television via the RCA
cable (see section below) if your television is equipped with this
type of connection.

Connecting DVD-VCR to the TV using the RCA Cable

TV
3
RF coaxial cable
ou can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available on
the television. You thus:
Obtain better quality sound and pictures
Simplify the setting up procedure of your DVD-VCR
Regardless of the type of connection chosen, you must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.
Make sure that both the television and the DVD-VCR are switched off before connecting the cables.
1
Connect the coaxial cable as indicated in the above section.
2 Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear of
the DVD-VCR.
3
Plug the other end into the appropriate connector on the television.
2
on the
TV
4
3
Aerial
2
13