VCR
Changing the Preset Station Table
GB
You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.
MAIN MENU
1
2
INSTALLATION
➛¤¤¤❿
RETURN
ENTER
❷¤¤
3
4
INSTALLATION
5
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH
:CH60
6
❷¤¤¤
RETURN
ENTER
7
TV STATION TABLE
PR
CH
NAME
1
21
----
8
2
3
4
5
9
❿¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
❷
SWAPPING:ENTER
RETURN
DELETE:CLEAR
TV STATION TABLE
PR
CH
NAME
1
2
3
21
----
4
5
❿¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
❷
SWAPPING:ENTER
RETURN
DELETE:CLEAR
24
Press the SETUP button on the remote control.
or ➛, ❿ buttons to select the
Press the corresponding
,
❷
Install
option.
Press the ENTER button to select this option.
Result:
The
menu is displayed.
INSTALLATION
Press the corresponding
or
❷
buttons, until the
MANUAL SET
UP
option is selected.
Press the ENTER button to select this option.
Result:
The
TV STATION TABLE
menu is displayed.
Press the corresponding
or
buttons, until the required preset
❷
TV programme is selected.
Result:
The selected station is displayed at the same time on
the television screen.
To change the programme number assigned to a station press the
ENTER button on the remote control. (For example, To move a TV
station in programme 1 to programme 3)
Press the
or
buttons to select required position.
❷
And then press ENTER again to swap the position.
On completion, press the RETURN button three times to exit the
menu.
Setting the DVD-VCR Output Channel
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1
Press SETUP on the remote control.
Result:
The programming menu is displayed.
or ➛, ❿ buttons to select the
2
Press the corresponding
,
❷
Install
option.
3
Press the ENTER button to select this option.
Result:
The
INSTALLATION
menu is displayed.
4
Press the
or
buttons, until the
VCR OUTPUT CH
❷
selected.
5
Select the required output channel (CH21~CH69) by pressing the
➛ or ❿ buttons.
6
On completion, press RETURN to exit the menu.
Then tune your television again (see page 15).
VCR
MAIN MENU
INSTALLATION
➛¤¤¤❿
RETURN
ENTER
❷¤¤
INSTALLATION
AUTO SET UP
CH21
MANUAL SET UP
option is
VCR OUTPUT CH
:CH60
CH36
CH69
➛¤❿¤¤
❷
RETURN
25
GB