Copying From Dvd To Vcr; Inserting Batteries In The Remote Control; Setting The Date And Time - Samsung DVD-CM350 Instruction Manual

Copying from DVD to VCR

GB
The DVD-VCR allows you to copy the contents of a DVD to a VHS
tape with a press of the COPY button.
1
1
2
3
2
4
☛
3
4
4
18
If the DVD you are attempting to copy is copy
protected, you will not be able to copy the disc. It is not
permitted to copy Macrovision® encoded DVDs.
Insert Disc
Insert the disc you wish to copy in the DVD deck and close the
drawer.
Insert VHS Tape
Insert a blank VHS videotape into the VCR deck.
Copy the DVD to VHS Tape
Press the COPY button on the DVD-VCR front panel.
N
The DVD will go into Play mode and the VCR will go into Record
mode.
Stop the Copy Process
When the DVD is finished playing, press the VCR button on the
remote control and then press the STOP button to end the copy.
N You must stop the Copy process manually when the DVD movie
ends or the DVD may replay and record over and over again.
The NTSC DVD or VCD Copy process can not active.

Inserting Batteries in the Remote Control

You must insert or replace the batteries in the remote control when
you:
N Purchase the DVD-VCR
N Find that the remote control is no longer working
correctly
1 Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2 Insert two AA, R6 or equivalent batteries, taking care to respect
the polarities:
N + on the battery with + on the remote control
N – on the battery with – on the remote control
3 Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
➢
Do not mix different battery types (manganese and
alkaline for example).

Setting the Date and Time

Your DVD-VCR contains a 24-hour clock and calendar used to:
N Automatically stop programme recording
N Preset your DVD-VCR to record a programme
automatically
You must set the date and time when:
N You purchase the DVD-VCR
☛
N Do not forget to reset the time when you change
clocks from winter to summer time and vice versa.
1 Press SETUP on the remote control.
Result: The programming menu is displayed.
or ➛, ❿ buttons to select the
2 Press the corresponding ,
œ ❷
CLOCK SET option.
3
Press the ENTER button to select this option.
Result: The menu is displayed.
CLOCK SET
Press ➛ or ❿ to select the hour, minutes, day, month and year.
4
Result: The option selected flashes.
5
Press the œ or ❷ buttons to increase or decrease the value.
Result: The day of the week is displayed automatically.
➢
You can hold the œ or ❷ buttons down to scroll more
quickly through the values.
6
On completion, press RETURN to exit the menu.
GB
1
MAIN MENU
CLOCK SET
➛¤¤¤❿
RETURN œ❷¤¤ ENTER
CLOCK SET
12:00 1/JAN/2003
WED
AUTO CLOCK :ON
➛¤❿¤¤¤
RETURN œ ❷
19