Audio Dubbing A Pre-Recorded Cassette - Samsung CHT-350 Instruction Manual

VCR
GB
2

Audio Dubbing a Pre-recorded Cassette

2
7
A.DUB
-0:05:23
40
With the Audio Dubbing function, you erase the previously
recorded sound and replace it with a new soundtrack from:
A CD, DVD
A microphone connected to a sound system
A cassette player
Restriction:
Audio dubbing is applicable only to the longitudinal audio track
(normal audio).
1
Connect an RCA audio cable to the appropriate output on your
sound system (cassette player for example).
2
Connect the other end of the RCA audio cable to the audio input
connectors (L, R) on the Rear of your DVD-VCR.
3
Insert the pre-recorded cassette on which the audio track is to be
replaced, and press the
4
Search for the Audio Dubbing (ending) point using the
the counter to 0:00:00 by pressing CLEAR.
5
Search back slightly beyond the Audio Dub start point using the
button.
❿
6
Press the ll button.
❿
Press the ll button one more time to make STILL mode.
7
Press A.DUB.
Result: Your DVD-VCR is now in the Audio dubbing Still
mode.
8
On the sound system, locate the point on the cassette at which
you wish to start playback.
Example: The track that you wish to record on the cassette.
9
When you are ready:
Start playback on the sound system
Press the REC on the remote control.
Result: The soundtrack is replaced on the pre-recorded cassette.
10
The audio dubbing will finish when the counter reaches 0:00:00.
The new sound will be recorded on the normal sound
track of the tape, and the original sound will remain on
the Hi-Fi sound track.
To hear the new sound and original sound mixed
together, press the Audio button on the remote control
until the MIX option is displayed (see page 34).
❿
ll to start playback.
❿ ❿ , and set
➛ ➛