Using The Timer Programming Feature - Samsung CHT-350 Instruction Manual

Using the Timer Programming Feature

The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
to be broadcast. Up to six programmes can be preset.
Before presetting a recording, check that the date and
time are correct.
1
Insert the cassette and press TIMER on the remote control.
Result: The timer programme is displayed.
2 Press ❿ to select the input source.
3
Select the required station by pressing the
4 Press ❿ to select the recording day.
5
Select the required day by pressing the
6 Press ❿ to select the recording start time.
7
Select the required hour value by pressing the
8 Press ❿ to select the minutes.
9
Select the required minute value by pressing the
10 Press ❿ to select the recording stop time.
11
Select the required recording stop time by pressing the
buttons, following the same procedure as when selecting the
recording start time.
12 Press ❿ to select the recording speed.
13
Press the or
❷
(Long Play), AUTO
14
When you have finished, press the RETURN button.
15
Press the STANDBY/ON button to activate the timer.
Result: Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.
Auto Tape Speed Select. The DVD-VCR's "Auto Tape
Speed Select" function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.
,
❷
or
❷
buttons to select the SP (Standard Play),
(Auto Tape Speed Select) recording speeds.
buttons.
buttons.
or buttons.
❷
or buttons.
❷
or
❷
LP
VCR
1/JAN TUE 12:09
PR DAY START STOP
1 SA 9 12:00 12:50SP
-- ---- --:-- --:----
-- ---- --:-- --:----
-- ---- --:-- --:----
-- ---- --:-- --:----
-- ---- --:-- --:----
➛❿
SET:
❷
RETURN DELETE:CLEAR
15
31
GB
❿