Adjusting The Lcd During Play; Controlling Sound From The Speaker; Play - Samsung VP-D30 Owner's Instruction Book

ENGLISH
Basic Recording

Adjusting the LCD during PLAY

You can adjust the LCD during playback.
The adjustment method is the same procedure as used in CAM mode. (see
page 31)

Controlling Sound from the Speaker

The Speaker works in PLAYER mode only.
When you use the LCD screen for playback, you can hear recorded sound
from the built-in Speaker.
- Follow the instructions below to decrease or mute speaker volume in the
PLAYER mode.
- Take the following steps to lower the volume or mute the
sound while playing a tape on the camcorder.
1. Set the power switch to PLAYER mode.
2. Press (PLAY/STILL) to play the tape.
3. When you hear sounds once the tape is in play,
use the MENU SELECTOR to adjust the volume.
A volume level display will appear on the LCD.
Levels may be adjusted from anywhere between
00 to 19 and you will not hear any sound when the
volume is set on 00.
If you close the LCD while playing, you will not hear
sound from the speaker.
Notes
When the cable is connected to the Multi AV jack,
you cannot hear sound from the speaker and cannot adjust the
volume.
If a cable is connected to the Multi AV jack, you can hear
sound from the speaker when AV IN/OUT MODE on
MENU is set to AV IN or S-VIDEO IN.
(VP-D30i/D31i/D33i/ D34i/D39i only)
You can hear sound from speaker by removing the connected
cable from the Multi AV jack.
The speaker turns off when you use headphones.
34 34

PLAY

PLAYER
-
2
3-1
VOL/MF
<3-2>
0 : 2 3 : 4 7
5 5 min
VOL. [ 1 1 ]
1 0 : 0 0
10 . J A N . 2 0 0 3
CAM
Speaker
PLAYER
-
1. PLAYER
2. (PLAY/STILL)
3.
SELECTOR
00 19
A/V
MENU
/
S-VIDEO IN S-
A/V
VP-D30i/D31i/D33i/D34i/D39i
A/V
31
/
MENU
00
AV IN/OUT MODE
AV IN