Demonstration - Samsung VP-D30 Owner's Instruction Book

Hide thumbs Also See for VP-D30:
Table of Contents

Advertisement

ENGLISH
Advanced Recording

DEMONSTRATION

Demonstration automatically shows you the major functions that are
included with your camcorder so that you may use them more easily.
The DEMONSTRATION function may only be used in the CAM
mode without a tape inserted in the camcorder.
The demonstration operates repeatedly until the DEMONSTRATION
mode switched OFF.
1. Set the camcorder to CAM mode.
2. Press the MENU button.
The menu list will appear.
3. Move the MENU SELECTOR to highlight INITIAL.
4. Select DEMONSTRATION from the submenu and push
the MENU SELECTOR.
5. To activate the DEMONSTRATION, set
DEMONSTRATION ON.
Press the menu button to quit the menu.
The demonstration will begin.
6. To end the DEMONSTRATION, set the
DEMONSTRATION to OFF.
Notes
The DEMONSTRATION function only works without a
TAPE installed.
The DEMONSTRATION mode is automatically activated when the
camcorder is left idle for more than 10 minutes after switching to the
CAM mode (no tape is inserted in the camcorder).
If you press other buttons (FADE, BLC, PHOTO, EASY) during the
DEMONSTRATION mode, the DEMONSTRATION stops temporarily
and resumes 10 minutes later if you do not operate any other functions.
While setting the NIGHT CAPTURE to ON, the DEMONSTRATION
function does not work.
DEMONSTRATION
DEMONSTRATION
CAM MODE
INITIAL
CLOCK SET
CAMERA
WL. REMOTE
A/V
BEEP SOUND
MEMORY
SHUT. SOUND
VIEWER
DEMO
CAM MODE
INITIAL SET
CLOCK SET
WL.REMOTE
BEEP SOUND
SHUTTER SOUND
DEMONSTRATION
DEMONSTRATION
FADE
10
NIGHT CAPTURE
DEMONSTRATION
DEMONSTRATION
OFF
1.
CAM
2.
MENU
3.
MENU SELECTOR
INITIAL
4.
DEMONSTRATION
MENU SELECTOR
5.
DEMONSTRATION
DEMONSTRATION
MENU
6.
DEMONSTRATION
DEMONSTRATION
DEMONSTRATION
CAM
DEMONSTRATION
BLE
PHOTO
DEMONSTRATION
DEMONSTRATION
ON
DEUTSCH
CAM
ON
OFF
10
EASY
41
41

Advertisement

Table of Contents
loading

Table of Contents