Table of Contents
Advertisement
ENGLISH
Advanced Recording
G WIND CUT
✤ The WIND CUT function works in CAMERA and PLAYER (VP-D101i/D102Di/D103i/D105i only) modes.
✤ The WIND CUT function minimizes wind noise or other noise while recording.
- When the wind cut is on, some low sounds are eliminated along with the sound of the wind.
1. Set the camcorder to CAMERA mode.
2. Press the MENU button.
I
The menu list will appear.
3. Turn the MENU DIAL to highlight A/V and press the ENTER button.
4. Select WIND CUT from submenu.
5. This feature toggles ON/OFF each time you press the ENTER button.
I
is shown in the display when you turn the WIND CUT on.
6. To exit, press the MENU button.
Notes
I
Make sure WIND CUT is set to off when you want the microphone to be as sensitive as possible.
I
Use the WIND CUT when recording in windy places such as the beach or near buildings.
54
54
CAM MODE
INITIAL
CAMERA
A/V
REC MODE
MEMORY
PHOTO SEARCH
VIEWER
COPY
AUDIO MODE
12
AUDIO SELECT
WIND CUT
PB DSE
AV IN/OUT
OUT
CAM MODE
A / V SET
REC MODE
PHOTO SEARCH
PHOTO COPY
AUDIO MODE
12
AUDIO SELECT
SOUND[1]
WIND CUT
PB DSE
OUT
AV IN/OUT
Advertisement
Table of Contents
