Page 1
OWNER’S INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL D’UTILISATION Indoor Unit Outdoor Unit AQ09A5(6)MAF UQ09A5(6)MAF AQ12AA(B)MCF UQ12AA(B)MCF AQ18A9(0)RCF UQ18A9(0)RCF AQ24A1(2)RC UQ24A1(2)RC AQ30C1(2)BC UQ30C1(2)BC Split Type Air Conditioner (Cool and Heat) Acondicionador de aire del tipo partido (Refrigeración y Calefacción) Climatiseur type Split (Refroidissement et Chauffage) E S F DB98-15773A(1)
Safety Precautions The following safety precautions must be taken when using your air conditioner. Risk of electric shock. • Can cause injury or death. • Disconnect all WARNING remote electric power supplies before servicing, installing or cleaning. • This must be done by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard.
View of the Unit The design and shape are subject to change according to the model. ✴✴09/12/18/24✴✴ Indoor Unit Air filter Air flow blades (outlet) Air Inlet (under the grille) Timer indicator Remote Control Sensor SAVING indicator STANDARD indicator SILENCE indicator NATURE indicator POWER indicator ON/OFF &...
Page 5
Outdoor Unit UQ09A5(6)MAF Air Inlet(Rear) Air Outlet Connection Valve Outdoor Unit Air Inlet(Rear) UQ12AA(B)MCF Air Outlet Connection Valve Outdoor Unit UQ18A9(0)RCF Air Inlet(Rear) UQ24A1(2)RC Air Outlet Connection Valve Outdoor Unit UQ30C1(2)BC Air Inlet(Rear) Air Outlet Connection Valve...
etting Started You have just purchased a split type air conditioner and it has been installed by your installation specialist. Your Owner’s Instructions contains valuable information on using your air conditioner. Please take the time to read it as it will help you take full advantage of the unit’s features.
Inserting the Remote Control Batteries You must insert or replace the remote control batteries when : ◆ You purchase the air conditioner ◆ The remote control does not work correctly ◆ Use two AAA, LR03 1.5V batteries. ◆ Do not use old batteries or different kinds of batteries together. ◆...
5 Way Function You can select the 5 Way function with operating mode of the air conditioner for more comfortable circumstances. You can use the 5 Way function with the indoor unit as well as the remote control. Thus, you can use this function even though you have lost your remote control.
Selecting the Automatic Operating Mode You can start the air conditioner in Automatic mode from your remote control. In the Automatic mode, the standard temperature and the optimum fan speed is selected automatically. You can adjust the standard temperature but not the fan speed. If necessary, press the (ON/OFF) button.
Cooling Your Room You must select the Cool mode if you wish to adjust the: ◆ Cooling temperature ◆ Fan speed when cooling If necessary, press the (ON/OFF) button. ◆ The 5 Way indicator on the indoor unit lights up. Result: ◆...
Heating Your Room You must select the Heat mode if you wish to adjust the: ◆ Heating temperature ◆ Fan speed when heating If necessary, press the (ON/OFF) button. ◆ The 5 Way indicator on the indoor unit lights up. Result: ◆...
Changing the Room Temperature Quickly The Turbo cooling/heating function is used to cool or heat your room as quickly as possible. You have just come home and find that the room is very hot. You wish to cool it down as quickly as possible. The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected.
Removing Excess Humidity If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much. If necessary, press the (ON/OFF) button. ◆ The 5 Way indicator on the indoor unit lights up. Result: ◆...
Airing Your Room If the atmosphere in your room is stale, you can air the room using the Fan feature. If necessary, press the (ON/OFF) button. ◆ The 5 Way indicator on the indoor unit lights up. Result: ◆ The air conditioner starts up in the mode selected when the unit was last used.
Adjusting the Air Flow Direction Vertically Depending on the position of the indoor unit on the wall of your room, you can adjust the position of the outer air flow blade on the bottom of the unit, thus increasing the efficiency of the air conditioner. Press the button one or more times as required.
Adjusting the Air Flow Direction Horizontally There are two sets of inner air flow blades. Just as the outer air flow blade can be adjusted vertically, the inner blades can be adjusted horizontally. Adjust each set of inner blades to the required position, by pushing or pulling them sideways.
Setting the On Timer The On Timer enables you to switch on the air conditioner automatically after a given period of time. You can set the period of time from 30 minutes to 24 hours. To set the operating time, press the button one or more times until the required time is displayed.
Setting the Off Timer The Off Timer enables you to switch off the air conditioner automatically after a given period of time. You can set the period of time from 30 minutes to 24 hours. To set the operating time, press the button one or more times until the required time is displayed.
Setting the Sleep Timer The Sleep Timer can be used when you are cooling or heating your room to switch the air conditioner off automatically after a period of six hours. If you wish to switch the unit off at a specific time, refer to page 19.
Operating Recommendations Here are a few recommendations that you should follow when using your air conditioner. Topic Recommendation Heating performances The heat pump inside the air conditioner absorbs heat from outside air and brings it indoors. If the temperature of the outside air drops, the air conditioner will heat less.
Temperature and Humidity Ranges The following table indicates the temperature and humidity ranges within which the air conditioner can be used. If the air conditioner is used at... Then... High temperatures The automatic protection feature may be triggered and the air conditioner stopped.
Cleaning Your Air Conditioner ✴✴09/12✴✴ To get the best possible use out of your air conditioner, you must clean it regularly to remove the dust that accumulates on the air filter. Before cleaning your air conditioner, ensure that you IMPORTANT have switched off the breaker used for the unit.
Solving Common Problems Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary call. Problem Explanation/Solution ◆ Check that the breaker used for the air conditioner is switched on. The air conditioner does not ◆...
Installing a Filter (Option) The air conditioner can be fitted with a deodorizing and Bio-Pure filter to remove minute dust particles or odours. The service life of the filter is approximately three months depending on the time during which the air conditioner is used. Remove the vinyl packing from the filter.
Page 28
THIS AIR CONDITIONER IS MANUFACTURED BY: ESTE AIRE ACONDICIONADO HA SIDO FABRICADO POR: CE CLIMATISEUR EST FABRIQUE PAR: ELECTRONICS Printed in Korea...