Advertisement
Quick Links
Please study these instructions carefully before installing your new standard bottle valve and 10-lb. bottle
siphon tube. If you have any questions or problems, please contact our Technical Hotline at: 1-800-416-8628 from
7 am - 5 pm, Monday through Friday, Pacific Standard Time or e-mail us at edelbrock@edelbrock.com.
Description: The standard bottle valve with 10-lb. bottle siphon tube kit consists of a replacement bottle valve for use
on any brand 10-lb. nitrous bottle and .500" high flow siphon tube.
B
Lubricate the bottle
valve o-ring with the
r e c o m m e n d e d
lubricant.
©2003 Edelbrock Corporation
Brochure # 63-0206
Quantity
A
ONLY USE wide temperature range (-40°F to 400°F), fuel and oxidizer
C
resistant synthetic grease on the bottle valve O-Ring. Non-compatible
greases may cause the O-ring to swell resulting in improper seal and
premature wear.
Lubricants, Inc., Tribolube-16 which meets the qualification requirements
of Mil-G-27617D Types 2 & 3.
Apply a small amount of
red Loctite to siphon
tube threads and install
on valve.
Edelbrock Corporation
2700 California St.
Torrance, CA 90503
Tech Line: (800) 416-8628
E-Mail: Edelbrock@edelbrock.com
Standard Bottle Valve With 10-lb. Bottle Siphon Tube
KIT CONTENTS
1
"Bottle Valve, 660 High Flow"
1
"10-lb. Bottle Siphon Tube"
1
"Bottle Valve, O-Ring"
WARNING!!!
Edelbrock recommends the use of Aerospace
ASSEMBLY
Make sure inlet of
siphon tube is aligned
with the outlet of valve.
Edelbrock Nitrous Systems
INSTALLATION INSTRUCTIONS
Description
Install the bottle valve
and
siphon
tube
assembly on bottle.
Torque valve to 110-
ft/lbs.
Catalog #72310
(A)
(B)
(C)
Cut-away
view
of
properly installed valve
and siphon tube in a
10-lb. bottle.
Rev. 8/03
Advertisement
