Tv/Vcr Configuration; Tv Format; Tv Output Signal; Tv Audio Signal - Philips DTR2000/00 Manual

7.2.2

TV/VCR configuration

This feature is used to configure your STB outputs.
Use the t or y button to move from one item to another.
Select a value for each using the
"OK" to confirm or "BACK" to cancel.
Note: These settings have been preset for your country.

7.2.2.1 TV Format

This feature is used to select the viewing format that best
suits your TV.
o 16/9
o 4:3 Letterbox
o 4:3 Pan&Scan

7.2.2.2 TV output signal

This feature is used to match your TV and VCR output
signals.
o RGB
o PAL
o SECAM
o S-VIDEO

7.2.2.3 TV audio signal

Depending on the capability of your TV, select one of the
following options:
o Stereo
o Mono

7.2.2.4 VCR output signal

Note: This value is automatically set by the system according to
the "TV output signal" option you selected.
o PAL
o SECAM
o S-VHS
or button, then press
u i
CHANGING THE SETTINGS OF YOUR RECEIVER 23