MENU
P
Y
MENU
P
1
2
3
4
5
6
7
8
9
0
SMART CONTROLS
To select connected equipment
If the TV is connected to a video recorder with the EasyLink function, in some cases
the TV will be switched on, even when the TV was in standby. (E.g. playback tape,...)
This is not possible when Child Lock On is selected.
Equipment connected with an aerial cable only :
•
Select the programme number under which you have stored the test signal
with the digit keys.
Equipment connected to a euroconnector or to the front side of
the TV
•
Press repeatedly the
to where you connected your equipment at the back or the front side of your
TV.
Remark : Most equipment (decoder, video recorder) carries out the switchover itself.
Do you want to watch TV channels again ?
•
Enter the programme number of the TV channel which you want to watch with
the digit keys.
Video recorder keys
Most of the video equipment from our range of products can be operated with
the remote control of the TV.
Press simultaneously on the
k
for record,
k
for rewind,
P
k
for fast forward,
k
for stop,
k
for play,
for programming (on certain models),
3
for selecting 1- or 2- digit programme numbers from the
video recorder tuner,
R
for fast programme selection from the video recorder tuner,
0
9
to
to select a programme number from your video recorder
tuner,
to switch off the video recorder temporarily
These keys function with video recorders which use the RC5 signalling standard.
If your video recorder has the EasyLink function the
record and stop can be operated in the TV mode.
key to select
,
,
EXT1
EXT2
EXT3
key and:
VCR
or
, according
FRONT
and
keys for
17
17