Philips HDRW720/00 User Manual page 70

•) Switch on the TV, and if necessary, select the programme number
for the DVD recorder.
•) Switch on the DVD recorder.
1 Press TIMER s
7
on the remote control while the DVD
recorder is switched on.
P
The ' ' screen will appear.
2 Use B
O or A I
to select the programmed recording you
want to change or delete.
Depending on the programming method (using GUIDE Plus+
system, with/without ShowView
carry out certain changes using the function buttons. Therefore,
always check the function of the corresponding button (description
in the colour field) before pressing the button.
A programmed recording will run as long as the end of the TV show is
reached (end time of the schedule or end time out of the GUIDE
Plus+ ® system)
If you switch off the DVD-Recorder with STANDBY m
DVD-Recorder will be switched off after the recording is completed.
If you want to cancel the programmed recording proceed as follows:
1 If necessary, switch the TV to the programme number (input
socket) of the DVD recorder.
2 If necessary switch the DVD-recorder on using
STANDBY m 2
.
3 Press STOP h
N
.
P
A message appears on the screen, asking whether you really
want to end the recording.
®
® system), it is not possible to
2
the
EXT2 AUX-I/O
B O A I
L
OK
E
3 To end, press TIMER s
If you want to end the recording, select '
L
confirm with OK
If you do not want to end the recording, confirm '
L
OK .
The programmed recording can also be canceled as described
in the previous section 'How to change or delete a
programmed recording (Timer)'.
D
C
M
F
F
7
.
' with D
.
0..9
K
and
' using