Philips DVDR725H/00 User Manual page 17

This cable, usually with yellow Cinch connectors, transmits a
Composite Video signal (FBAS, CVBS). The colour signal and the
brightness signal are transmitted on the same cable. In certain
circumstances, this can lead to slight problems with the picture, such as
'Moiré' patterns.
1 Insert one end of a video (CVBS) cable
P
(CVBS)
(yellow cinch socket) at the back of the DVD
recorder and the other end into the video input socket (usually
yellow) on the TV (usually labelled 'Video in' or 'AV in'. See TV
operating instructions).
2 Insert one end of an audio (Cinch) cable
Q
L/R (red/white Cinch socket) at the back of the DVD recorder
and the other end into the audio input socket (usually red/white)
on the TV (usually labelled 'Audio in' or 'AV in'. See TV operating
instructions).
Read the next chapter 'Connecting additional devices' on how
to connect additional devices (satellite receivers,
videorecorders,...) to the input-/output sockets.
Then, read the chapter on 'Connecting to the mains'.
This cable, transmits the brightness (Y signal) and colour (C signal)
separately. This mini DIN socket/plug is also called a Hosiden
socket/plug.
1 Insert one end of an S-Video(SVHS) cable
O
OUT (Y/C) socket at the back of the DVD recorder and the
other end into the S-Video (SVHS) input socket on the TV (usually
labelled 'S-Video in' or 'SVHS in'. See TV operating instructions).
E
into VIDEO OUT
F
into AUDIO OUT
G
into the S-VIDEO
2 Insert one end of an audio (Cinch) cable
Q
OUT L/R
(red/white Cinch socket) at the back of the DVD
recorder and the other end into the audio input socket (usually
red/white) on the TV (usually labelled 'Audio in' or 'AV in'. See TV
operating instructions).
Refer to 'Connecting additional devices' to connect devices
like satellite receivers and videorecorders to the input-/output
sockets.
Proceed to 'Initial Installation'.
Switching the signal to the COMPONENT VIDEO OUT
is carried out in a menu that is not available until the Initial Installation
is complete.
Component video (Y Pb Pr) is the highest quality picture transmission
option. The video and two colour difference signals are transmitted
through separate lines. The connectors and corresponding sockets are
usually green (Y), blue (U), and red (V).
•) Switch on the TV, and if necessary, select channel assigned to the
DVD recorder.
•) Switch on the DVD recorder.
1 Press the DISC MENU
B
A
MENU
buttons on the remote control.
P
The menu bar appears.
2 Select '
' symbol with D
F
into the AUDIO
R
and then the SYSTEM
K
.
sockets