Philips DVDR725H/00 User Manual page 16

To receive TV programmes you have to connect the DVD-recorder to
the aerial or the cable network.
1 Switch off your TV.
2 Remove the aerial cable plug
K
the ANTENNA IN socket at the back of the DVD recorder.
3 Insert one end of the supplied aerial cable
L
OUT socket at the back of the DVD recorder and the other
end into the aerial input socket at the back of the TV.
A
from your TV, and insert it into
B
into the TV
The scart (Euro AV) cable is a the universal connector for picture,
sound and control signals with practically no loss of picture or sound
quality.
C
1 Plug a scart cable
into the scart socket EXT1 TO
N
TV-I/O
at the back of the DVD recorder and the scart socket
for the DVD recorder at the back of the TV (see TV operating
instructions).
Refer to 'Connecting additional devices' to connect devices
like satellite receivers, and videorecorders to the
input-/output sockets.
Proceed to 'Initial installation'.
To connect this DVD-Recorder to a TV without external Audio/Video
input sockets, you need a modulator. With the modulator the
audio/video signal is converted in an UHF-channel. This signal can be
received and stored on the TV as a TV-station.