Table of Contents
Advertisement
(2) The setting item (flashing) changes each time the
menu switch, item switch, or NO switch is pressed.
Select [Option Card Set] and press the YES switch
to display the [Option Card Set] submenu.
(3) Select [Component] with the menu switch and item
switch, and select [R/G/B], [Y/Pr/Pb] or [Y/C] with
the YES and NO switches.
(4) Select [Return] with the menu switch and item
switch, and press the YES switch to return to the
main menu.
(5) The camera is now back in shooting condition.
Camera alone: Select [End] with the menu switch
and item switch, then press the YES switch.
With RCU (RCB): Set the user set switch in the
pocket to OFF.
The camera will now operate under the conditions
thus set.
MENU Switch i " j
ITEM/AWC Switch i « j
YES/ABC Switch i { j
NO/BAR Switch i | j
RCU (RCB)
User Set Switch
ENC
VF
USER SET
H.PHASE
**Option Card Set*
Component
Return
-9-
CAMERA
OPTION CARD
VIDEO OUT
I/F REMOTE
MENU
G/L IN
ITEM/AWC
YES/ABC
+
IRIS
NO/BAR
–
DC12V IN
PAGE Switch
ITEM Switch
UP Switch
DOWN Switch
OFF
PAGE
ITEM
UP
DOWN
ON
SC PHASE
COARSE
FINE
0
270
90
180
R/G/B
Advertisement
Table of Contents
