Table of Contents
Advertisement
Activate IR Port
Press
. Select the Quick Access feature.
Press
to activate the infra-red feature.
indicates that the phone is ready for an infra-red connection.
Your phone waits for an infra-red connection for one minute and
then automatically de-activates. Before the infra-red feature de-
activates, your phone emits an alert tone and displays the
Reactivate IR Port prompt. Press
For additional setup details, see 'Setting up the Infra-Red Feature'
in the 'About Your Phone...' section of this manual.
Adjust Contrast
Press
. Select the Quick Access feature.
This option is used to adjust the screen contrast.
The contrast is displayed as follows:
Adjust the contrast by pressing
Pressing
or
on the keypad will end the contrast
adjustment.
English
58
Using the Options Menu
Activated
to continue.
or
on the keypad.
Require SIM Card PIN
This option is used to set, and change, the PIN code.
The PIN code can be set to protect your SIM card from
unauthorized use. If set to On, access to your SIM card will be
restricted each time it is inserted or the phone is turned on.
The option has two settings, On or Off.
If the SIM card does not support PIN code disabling, these
items will not appear.
Change SIM PIN Code
This option is used to change the SIM card PIN code.
The 'Require SIM Card PIN' option must be set to On and you
must enter the old PIN code before you can proceed.
You will be asked to enter a new, four to eight digit code to
replace the old PIN code. The new PIN code must be entered
again as confirmation.
If the PIN number is entered incorrectly three times in a
row, your SIM card will automatically lock-up and the
Blocked message will be displayed.
Advertisement
Table of Contents
