Table of Contents
Advertisement
Receiving a Phone Call
To receive a phone call:
• Your phone must be switched on and unlocked.
• You must be in an area where there is GSM 1900 service.
• Your Call Forwarding and Call Barring settings should not be
set to forward or bar incoming calls.
When your phone receives a call, it will ring or vibrate and the
display will show the Call message (if you have Caller Line
Identification, the caller's number or name will be displayed
instead).
To answer the call, press
with a flip when the 'Key Answer Only' feature is set to Off).
When the identification is displayed, you can decide whether or
not to answer the call by pressing
),
or
. To set this option, see 'Key Answer Only'.
You can also answer using the keys if the phone rings while the
phone is already open.
or open the flip (only on models
, a numeric key (
If you do not wish to answer a call, you can either:
Press and release the
'Detailed Forwarding - If Busy' or 'Forward when unavailable'
options in the Options Menu, the caller will be forwarded to
the forwarding number, otherwise the caller will hear the busy
tone.
or
Press and hold the
No call forward option will be offered.
If your phone rings and you do not answer it, the message
Unanswered Call will be displayed to show you that a call
attempt was received.
Ending a Phone Call
To end a phone call, press
to
Making and Receiving Phone Calls
key. If you have enabled the
key. This will reject the incoming call.
,
or close phone.
29
English
Advertisement
Table of Contents
