Motorola CDMA CONNECTIVITY KIT User Manual page 11

1 2
Connecting..
IU
©1999 Motorola, Inc.
Receiving a Data Call
If you are using the software that came in the Motorola Data
Connectivity Kit, the application that you installed will
automatically answer incoming data or fax calls.
Keep in mind: The data cable must be connected to your phone
and a computer and both must be ON. Also remember, if you press
æ
on your phone, you will lose the incoming call.
To receive a call:
1. Check that the data cable is connected.
2. Select the
3. Your phone will automatically answer the call.
or
If necessary, select the menu option in the application.
While the connection is being made,
2 5
your phone will display: Connecting...
If the connection does not succeed, the display will
return to idle.
If you are not using the software that came with the Data
Connectivity Kit, consult the user's guide that came with the
software you are using.
pre-arrangement mode if necessary.
Previous Menu Next 11