Scan Revert; Group Scan - Kenwood TK-863G Instruction Manual

■

Scan Revert

You can select revert systems and groups using the System and Group keys.
Four types of Scan Reverts can be programmed by your dealer:
• Last Called Revert: The last system/ group received is assigned as the
new revert system and group.
• Last Used Revert: The last system/ group responded to is assigned as
the new revert system and group.
• Selected: The last system/ group selected is assigned as the new revert
system and group.
• Selected + Talkback: If the system/ group has been changed during
Scan, the newly selected system/ group is assigned as the new revert
system and group. The transceiver "talks back" on the current receive
group.
G S
ROUP CAN
Group Scan is available for both trunked and conventional systems. This feature
is useful when more than one group is programmed in a system. Group Scan is
set by your dealer on request. It scans the revert groups as well as groups that
are allowed to be scanned.
When a call is received, the group indicator shows the group number, and that
group becomes the revert group. Simply press and hold the PTT switch, then
speak into the microphone to respond to the call.
You can also perform Group Scan while using a priority group. Please contact
your dealer for information concerning Priority Scan.
12