Kenwood KRF-X9995D Connection And Setup Manual page 60

Chapter Five : Specifications
NOTE: Do not use contact cleaning agents because they
could cause a malfunction. Be especially careful not to use
contact cleaning agents containing oil, since they may de-
form the plastic components.
KRF-X9995D (for U.K.)
Audio Section
Rated Output Power during stereo operation
1 kHz, 0.03% T.H.D. , 6 (DIN/IEC) ........... 140W + 140 W
20 Hz ~ 20 kHz, 0.03% T.H.D. , 6
.......................................................................... 130W + 130 W
Effective Output Power during surround operation
1 kHz, 0.06% T.H.D. at 6 , all channel driven
(Front, Center, Surround) .................................. 130 W
Total Harmonic Distortion ............. 0.005 % (1 kHz, 65 W, 6
Frequency Response (IHF'66)
54
Line (CD1, MD/TAPE, CD2/TAPE2 MONITOR, CD-R,
VIDEO 1 - 4, DVD/6CH.) ......... 7 Hz ~ 100 kHz, 0 dB, -3 dB
Signal to Noise Ratio (IHF '66)
PHONO (MM) ............................................................... 76 dB
CD1 .................................................................................. 98 dB
Input Sensitivity / Impedance
PHONO (MM) ................................................ 4.0 mV / 47 k
CD1 ................................................................. 300 mV / 47 k
DVD/6CH. ....................................................... 300 mV / 47 k
Output Level / Impedance
TAPE REC ..................................................... 300 mV / 2.2 k
PRE OUT (Front, Center, Surround, Surround back)
................................................................................ 1 V / 470
PRE OUT (Subwoofer) ................................... 1.8 V / 470
Tone Control
Bass ............................................................ + 7 dB (at 100 Hz)
Treble ......................................................... + 7 dB (at 10 kHz)
Loudness Control Volume at -30 dB level
............................................. +6 dB (100 Hz), +3 dB (10 kHz)
Digital Audio Section
Sampling Frequency ............. 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input Level / Impedance / Wavelength
Optical ........................ -15 dBm ~ -21 dBm, 660 nm +30 nm
Coaxial ............................................................ 0.5 Vp-p / 75
Chapter Five: Specifications
Read this page carefully to ensure safe operation.
Output Level / Impedance / Wavelength
Optical ........................ -15 dBm ~ -21 dBm, 660 nm ±30 nm
Coaxial ............................................................ 0.5 Vp-p / 75
Video Section
Video Inputs / Outputs
Video (composite) ............................................. 1 Vp-p / 75
S Video ( luminance signal) .............................. 1 Vp-p / 75
(chrominance signal) .................. 0.286 Vp-p / 75
Component (luminance signal) ....................... 1 Vp-p / 75
(IEC)
(P
FM Tuner Section
Tuning Frequency Range ........................... 87.5 MHz ~ 108 MHz
5
) Usable Sensitivity (DIN at 75
Mono .................. 1.3 V/ 13.2 dBf (40 kHz dev., S/N 26 dB)
Stereo ................ 35.1 V/ 42.1 dBf (46 kHz dev., S/N 46 dB)
Total Harmonic Distortion (DIN at 1 kHz)
Mono ................................................... 0.2 % (71.2 dBf input)
Stereo ................................................... 0.8 % (71.2 dBf input)
Signal to Noise Ratio (DIN weighted, 1kHz)
Mono ............................. 65 dB (40 kHz dev., 71.2 dBf input)
Stereo ............................. 60 dB (40 kHz dev., 71.2 dBf input)
Stereo Separation (DIN at 1 kHz) ..................................... 36 dB
Selectivity (DIN ±300 kHz) ............................................... 64 dB
Frequency Response ................ 30 Hz ~ 15 kHz, +0.5 dB, -3.0 dB
AM Tuner Section
Tuning Frequency Range ........................... 531 kHz ~ 1,602 kHz
Usable Sensitivity (30 % mod., S/N 20 dB)
........................................................................... 16 V / (500 V/m)
Signal to Noise Ratio (30 % mod., 1 mV input) .............. 50 dB
Relay and IR In/Out Section
Relay Control Terminal
Maximum Output Current ............................................ 20 mA
Operating Voltage .............................................................. 12 V
Output Impedance .......................................................... 470
/P -signal) ............................. ±0.350 Vp-p / 75
B R
)
IR Receiver In Terminal
Maximum Output Current ............................................ 20 mA
Operating Voltage .............................................................. 12 V
Output Impedance .......................................................... 470
IR Out LCD Remote Terminal
Maximum Output Current ............................................ 20 mA
Operating Voltage ................................................................ 5 V
Output Impedance .......................................................... 470
SHAPE OF PLUG TO BE CONNECTED:
IR Receiver In and IR Out DVD Control
LCD Remote
Stereo mini plug Mono mini plug
Sleeve
Tip
Ring
IR IN/OUT SPECIFICATION:
Terminal
IR Receiver In
To Tip Signal
To Ring Ground
To Sleeve +12V
RELAY CONTROL SPECIFICATION:
status
Power Power
Off On
To Tip 0V 0V
To Ring 0V +12V
To Sleeve Ground Ground
Sleeve
Tip
IR Out LCD
Remote
Signal
Ground
When a specific
button on one of
PowerTouch's
screen is pressed.
+12V
Ground