Download Print this page

Kenwood KRF-V6030 Quick Start Manual

Preset remote control
Hide thumbs

Advertisement

Quick Links

Remote Control Instruction Manual
Preset Remote Control Quick Start Guide
POWER
1
2
3
4
5
6
7
8
9
RETURN
0
+10
LSTN.M
DISPLAY
MENU
OSD
PTY
SET UP
SOUND
CDR
P.CALL
P.CALL
MULTI CONTROL
CD
TUNING
ENTER
A/B+100
AUTO
B.BOOST
DISC SKIP
RECEIVER
TITLE
INPUT SEL.
PHONO
CD/DVD
TUNER
TV SEL.
VIDEO1
VIDEO2
VIDEO3
MUTE
VOLUME
RC-R0610
Remote Control Instruction Manual
POWER
TV
VCR/CDR
DVD
BAND
DVD
MD/TAPE
CHANNEL
AV AUX
B60-4624-00 (EN)
Quick start guide ................................................ 1
Getting the most from your remote control ................. 3
Setup code chart ................................................ 4
In case of difficulty ............................................. 5
Remote operation of other components ..................... 6
This quick start guide explains how to setup the remote
control to operate audio and video components other
than the receiver.
In order to make full use of the functions of the remote
control, be sure to read the section of this manual
entitled "Getting the most from your remote control".
It contains a detailed explanation of how to operate the
remote control and make the necessary settings.
The quick start guide describes the operation of the
following keys:
1 POWER key
During pressing this key, you can enter the code numbers
that let you control your components.
2 Numeric keys
During pressing the POWER key, use these keys to enter
the code numbers that let you control your components.
3 Source POWER (TV, VCR/CDR, DVD) keys
Once you have entered the setup code for another
component, you can press these keys to turn power to
that component on or off. This lets you confirm that you
entered the code properly.
This instruction manual is for some models.
Model availability and features (functions) may differ depending on the
country and sales area.

Advertisement

loading

  Summary of Contents for Kenwood KRF-V6030

  • Page 1 Remote Control Instruction Manual Preset Remote Control Quick Start Guide Remote Control Instruction Manual Quick start guide ..........1 Getting the most from your remote control ....3 Setup code chart ..........4 In case of difficulty ..........5 Remote operation of other components ..... 6 This quick start guide explains how to setup the remote control to operate audio and video components other than the receiver.
  • Page 2 Quick Start Guide Register the setup codes for your audio and video components Step 1 If the component does not respond when you try to control it, return to step 2 and enter the next setup Look up the setup code for the component you want code on the list.
  • Page 3: Getting The Most From Your Remote Control

    Note • Example: Press "805" to register a DVD player made by KENWOOD. Be sure to point the remote control at the remote sensor on the receiver • If you push an invalid key, the remote will exit the setup mode.
  • Page 4: Setup Code Chart

    Setup codes BLAUPANKT BLAUPANKT GRUNDIG GRUNDIG SONY MIVER LOEWE 503, 504 PIONEER NOKIA PANASONIC NOKIA NORDMENDE 404, 405 KENWOOD 804, 805, 808 NORDMENDE 506, 507, 508 PHILIPS TOSHIBA PHILIPS SABA 404, 407 PHILIPS SABA SCHNEIDER SIEMENS TELEFUNKEN 407, 409, 410...
  • Page 5: In Case Of Difficulty

    In case of difficulty Remote control unit Symptom Cause Remedy Certain inputs cannot be selected using the • No setup codes registered at for the respective • Register a setup code at the respective input(s). remote control. input(s). Remote control operation is not possible. •...
  • Page 6: Remote Operation Of Other Components

    Remote operation of other components Refer to the following for the type of remote control operations available for each component. The setup code for each component must be entered beforehand. • When pressing keys in succession, press each key firmly and be sure to 1 Use the input selector keys or source POWER keys to select wait at least 1 second before pressing the next key.
  • Page 7 Remote operation of other components TV operations ENTER BAND INPUT SEL. MD/TAPE TUNER CHANNEL MUTE VOLUME AUTO TV SEL. AV AUX VIDEO3 CHANNEL % VOLUME % ENTER INPUT SEL. MUTE (Mute) (Enter) (Channel +) (Volume +) (Input selector) CHANNEL fi VOLUME fi...
  • Page 8 Remote operation of other components CDR operations ENTER BAND MENU P.CALL P.CALL MD/TAPE SOUND SET UP CHANNEL MULTI CONTROL AUTO AV AUX % (Cursor ») CHANNEL % ENTER (Enter) MENU fi (Cursor «) (Menu) (Channel +) (OSD menu) CHANNEL fi @ (Cursor |) # (Cursor \) (Channel –)

This manual is also suitable for:

Krf-v7030Rc-r0610