Kenwood DP-K1000 Instruction Manual page 32

Troubleshooting
Resetting the microcomputer
Symptoms
Microcomputer
malfunction (the system
does not work, the
display is faulty, etc.).
32
DP-K1000
Possible Cause/Solution
Malfunctions may occur due to an external cause or because a
connection cord was unplugged while the system was turned on.
Use the procedure below to reset the microcomputer.
1Unplug the power cord from
the AC wall outlet.
2Plug the power cord back in while
holding down the power [K] key on
the main unit.
3When the microcomputer is reset,
the display shown on the right
appears.
If you reset the microcomputer
with a disc loaded, the disc is
automatically ejected. In that case,
remove the disc and close the
CD tray.
Main unit