Kenwood DP-K1000 Instruction Manual page 26

Program Playback
26 26
DP-K1000 DP-K1000
5 5
Press the [E] key to begin playback.
To cancel program mode
Stop playback and press the [P.MODE] key so that "PGM" is no longer
displayed. This erases the selected program.
To check the current program number
Press the [CHECK] key during playback.
To check the programmed tracks
Stop playback, press the [CHECK] key and then press the [G] or [H]
key.
The program number and track number (
fi le name ( MP3/WMA/AAC
To change programmed tracks
Stop playback and press the [CHECK] key. Press the [G] or [H] key
to select the program number to be changed and then press the [ENTER]
key. Carry out steps 2 and 3 (
"Program Playback" procedure.
Then press the [CHECK] key to return to the normal display.
To add more tracks later
Stop playback and carry out steps 2 and 3 (
WMA/AAC ).
To erase a programmed track
To select a track and erase
Stop playback and press the [CHECK] key. Press the [G] or [H] key to
select the program number to be erased and then press the [CLEAR] key.
The selected program number is erased and the subsequent program
number advances by one.
To erase the last track
Stop playback and press the [CLEAR] key.
Each time you press the key, the last programmed track is erased.
If you turn the system off or remove the CD for which program playback is set, the
information in the specifi ed program is erased.
CD ) or the program number and
) are displayed in order of program number.
CD ) or steps 1-2 to 3 ( MP3/WMA/AAC
CD ), or steps 1-2 to 3 (
) in the
MP3/