Table of Contents
Advertisement
Volume offset: Each source's volume can be set as a difference
from the basic volume.
5
Exit Audio Control mode
Press the [AUD] button.
Speaker Setting
Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Speaker Setting mode
Press the [Q] button.
3
Select the Speaker type
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
4
Exit Speaker Setting mode
Press the [Q] button.
Switching Display
Switching the information displayed.
Display
"SP OFF"
"SP 5/4"
"SP 6*9/6"
"SP OEM"
— 7 —
Press the [DISP] button.
Each time the button is pressed the display switches as shown
below.
In Tuner source
Information
Frequency (KRC-765/KRC-665)
Station name (KRC-765/KRC-665)
Program Service name or Frequency
(KRC-665R)
Radio text (KRC-665R)
Clock
Displaying the frequency during Program Service name
reception (KRC-665R only)
Press the [DISP] button for at least 1 second.
The frequency for the RDS station will be displayed for 5
seconds instead of the Program Service name.
In Tape source
Information
Play side
Tape running
Clock
In External disc source
Information
Track number (KRC-765)
Track number & Track Time
(KRC-665/665R)
Disc name
Disc title
Track title
Track number & Track Time (KRC-765)
Clock
Display
"SNPS"
"R-TEXT"
Display
"DNPS"
"D-TITLE"
"T-TITLE"
Advertisement
Table of Contents
