Table of Contents
Advertisement
Theft Deterrent Faceplate
The faceplate of the unit can be detached and taken with you,
helping to deter theft.
Removing Faceplate:
Press the release button and drop open the faceplate.
In its dropped condition, whilst drawing the faceplate to one
side, pull it to the front and remove it.
Release button
3 MD CHANGER + 1 PLAYER
KMD-D400
24BIT RESOLUTION
D/A CONVERTER
DASC
DIGITAL AUDIO
11BAND
MINI DISC
60
120
250
380
500
750
1k
2k
4k
8k
16k
SPECTRUM ANALYZER
NOTE
• If the controls remain untouched for a period of 5 minutes or
more after the panel has dropped open or been removed, the
disc will automatically stop playing. (A warning beep starts
sounding 30 seconds before play stops automatically.)
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the
faceplate in its special storage case whilst detached.
• Do not expose the faceplate or its storage case to direct
sunlight or excessive heat or humidity. Also avoid places
with too much dust or the possibility of water splashing.
3
2
1
DISP
Reattaching Faceplate:
Hold the faceplate so that the
operation face faces the front
toward you and press until it
locks. The faceplate will be set
and the unit will be operational.
NOTE
When there is difficulty in setting
the faceplate, align the depression
on the left side of the faceplate
with the shaft of the unit, then
lock.
— 9 —
Shaft
Depression
Advertisement
Table of Contents
