Speaker Setting; Clock Display; Non-Fading Output - Kenwood KDC-5018 Instruction Manual

sound quality parameters:
Bass center frequency, bass level, bass quality factor, bass
extend, middle center frequency, middle level, middle quality
factor, treble center frequency, treble level, non-fading level,
high-pass filter frequency for front output, high-pass filter
frequency for rear output, and low-pass filter frequency for non-
fading output.
Their setting values are different depending on the setting of the
speaker setting mode.

Speaker Setting

This function allows you to adjust the setting that is recalled
with the System Q, according to types of speakers.
1
Press the SRC button repeatedly to select the standby mode.
"ALL OFF" is displayed when the standby mode is selected.
2
Press the Q button to enter the speaker setting mode.
Press either the 4 or ¢ button to select the type of
3
speaker. The setting switches as follows.
Off ("SP OFF") / For 6/6x9 in. speaker ("SP 6*9/6inch") /
For 5/4 in. speaker ("SP 5/4inch") /
For the OEM speaker ("SP O.E.M.")
4
Press the Q button to end the speaker setting mode.
NOTE
Speaker setting function allows for tuning of bass, middle and
treble

Clock display

Changing the Clock Display:
Each time you press the CLK button, the display switches
between the clock and each mode display.
NOTE
The clock indicator lights while the clock is displayed.

Non-Fading Output

You can turn the non-fading output on and off.
Turning non-fading output On/Off :
Press the NF button for at least one second to set the function
ON or OFF.
"NF ON" is displayed when the non-fading output is set ON.
TEL Mute
Shut down the audio system temporarily whenever an
incoming call is received.
NOTE
TEL mute will not work if a wire is not connected to a car phone.
When the telephone rings:
When a call is received, "CALL" is displayed and all the unit
functions are temporarily interrupted.
Listening to Audio During a Phone Call:
Press the SRC (source) button.
"CALL" disappears from the display, and the volume of the
original source is restored gradually.
Turning TEL Mute Off After a Phone Call:
Hang up the phone.
"CALL" disappears from the display.
The original source (the one used before the phone call) is
returned to automatically, and the volume restored gradually.
— 9 —
Function of the KDC-7018
Function of the KDC-V7018R