Demonstration Mode Setting - Kenwood KDC-139 Instruction Manual

Menu Operation
Function of KDC-MP439/KDC-MP3039/KDC-MP339/
KDC-MP239

Demonstration mode Setting

Sets the demonstration mode.
1
Select the Demonstration mode
Press the top or bottom side of the Control
knob.
Select the "DEMO" display.
2
Set the Demonstration mode
Press the center of the Control knob for at least
2 seconds.
Each time you press the knob at least 2 seconds,
the Demonstration mode alternates between the
settings shown in the table below.
Display Setting
"DEMO ON" The Demonstration mode function is ON.
"DEMO OFF" Exit Demonstration mode (Normal mode).
12
|
KDC-MP439/KDC-MP3039/KDC-MP339/KDC-MP239/KDC-139