Table of Contents
Advertisement
Tuner features
Station Preset Memory
Putting the station in the memory.
1
Select the band
Press the [FM] or [AM] button.
2
Select the frequency to put in the memory
Press the [4] or [¢] button.
3
Put the frequency in the memory
Press the [1] — [6] button for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the memory on each [1] —
[6] button.
Auto Memory Entry
Putting a station with good reception in the memory
automatically.
1
Select the band for Auto Memory Entry
Press the [FM] or [AM] button.
2
Enter Function Setting mode
Press the [FNC] button for at least 1 second.
"Function Set" is displayed.
3
Select the Auto Memory Entry mode
Press the [FM] or [AM] button.
Select the "AME Ready" display.
4
Open Auto Memory Entry
Press the [38] button for at least 2 seconds.
When 6 stations that can be received are put in the memory,
Auto Memory Entry closes.
Preset Tuning
Calling up the stations in the memory.
1
Select the band
Press the [FM] or [AM] button.
2
Call up the station
Press the [1] — [6] button.
CRSC (Clean Reception System Circuit)
Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
Press the [CRSC] button for at least 1 second.
Each time the button is pressed CRSC turns ON or OFF.
When it's ON, "CRSC On" is displayed.
— 18 —
Advertisement
Table of Contents
